Each type of bearing can be deep groove, spherical or recessed.Deep groove bearings are the most common.Embedded bearings are also deep groove bearings, which, like spherical bearings, can effectively withstand the effects of dislocation.

The difference with spherical bearings is that they have a smaller rotation Angle.The greater the rotation Angle, the greater the bearing deviation.

Another factor to consider is that, depending on usage, you will need a rotating shaft (such as wheel drive bearings in a car) or a rotating hub (such as a washing machine bearing).

Then, you need to pay attention to the way the TIMKEN bearings are assembled.If two bearings are too close to each other, the O-shape assembly method should be used to avoid bearing interference with each other.If this is not the case, then the X assembly method is most appropriate.

In short, each bearing has a specific size.These dimensions are expressed in millimeters and conform to international standards.Therefore, we recommend that you pay attention to the bore of the bearing, that is, the inner diameter (always denoted by the lowercase letter D), the outer diameter (denoted by the letter D) and the width (denoted by the letter B).